Please note: The location can be changed based on machine availability. Class can be changed as on-line “Team meeting” class.
Uncommon programming options. Polygon turning, Eccentric turning, Gear Hobbing, Differential speed tapping, 3D Chamfering.
Milling Interpolation G12.1, Cylindrical plane machining G16 Plane, G07.1 Angular interpolation.
Threading, G34 Variable Lead, G32 Link Threading, G35 & G36 Arc Threading.
B-axis Machining. G900 & G950, G920 & G930.
Parametric Programming, Maco Variables #100’s #500’s & Local, Macro formulas, G65.
G160 Torque sensing.
Thread Whirling / Thread Milling.
G173 Coordinate plane rotation for Pre-G950 machines.
Spindle sync details using “G899”.
G140 and or “T500K2, T1100K2, T500K3”.
Macro (day), basics / review Macro samples.. peck drill / thread mill.
LFV.
ATC operation.
Spindle sync detail “G899”.
Re-chucking operation.
Questions / answers / free time to test.
Please note: The location can be changed based on machine availability or switch to on-line class.
M/C Data detail
All function under “Prep page” (Mits) - Cut-off, Start pos, Trt retrac, … etc
Mode selection codes G600’s / G700’s
Tool setting. “Measure SET, Man set”
“Check mode” function (Mits) - HISPCHECK, Handle, Correct, N search
“M-CODE” examples
“T-code” (Mits)
Program sync code (waiting command “!1!2!3L12345)
Ridge tapping (Spindle1 & Spindle2, Live tool)
All canned cycle programs (G70~G76)
Bar change program sample
C-axis program (drilling, tapping, milling… polar & cylindrical)
Torque skip function (G160)
Part transfer method (spindle sync mode including “G650” mode)
Use of few different Cut-off confirmation
Chuck install / uninstall (including collet)
Chuck switch adjustment
Chucking pressure adjustment
Ejector / part catcher operation
Air blow and coolant operation
Turret index (Tool call)
Spindle rotation (SP1, SP2, Live tool)
Program “Handle”
“AUTO POWER OFF”
BIT select / Keep relay / Timer review
Please note: The location can be changed based on machine availability or switch to on-line class.
M/C Data detail
Mode selection codes G500’s
Tool setting. “Measure SET, Touch probe (if equipped)”
“M-CODE” examples
Program sync code “M9xx~”
Ridge tapping (Spindle1 & Spindle2, Live tool)
All canned cycle programs (G70~G76)
Bar change program sample
C-axis program (drilling, tapping, milling… polar & cylindrical)
Torque skip function
Part transfer method (spindle sync mode including “G550” mode)
Use of few different Cut-off confirmation
Chuck install / uninstall (including collet)
Chuck switch adjustment
Chucking pressure adjustment
Ejector / part catcher operation
Air blow and coolant operation
Turret index (Tool call)
Spindle rotation (SP1, SP2, Live tool)
Program “re-trace”
“AUTO POWER OFF”
BIT select / Keep relay / Timer review
Mode selection codes G600’s
Machining Data
Best Practices of Program Beginning and Program End
Review many less used functions that should be used
Cut-off check by spindle
Multiple parts per chuck process
HP coolant do’s and don’ts
Barfeed use
Other
Overall refresher course on Cincom Programming
Proper Installation
Signal Checking
Parameters related and settings
How to test
Troubleshooting
Common installation problems
Common Customer problems
Axis alignment
Turret alignment
Live tool alignment
Grid shift and tool holder fine adjustment
I/O signals review and troubleshooting
Ball Screw replacement techniques
Bearing checks
Others (trouble shooting)
Allendale, NJ Contact
Myrna Forman
201-818-0100
Fountain Valley, CA Contact
Carmen Lopez
714-434-6224
Elk Grove Village, IL Contact
Lidia Salgado
847-364-9060
Agawam, MA Contact
Lisa Booth
413-786-6655